The pulp and paper industry based on wood has considered the use of hemp for pulp, but only on an experimental basis. Hemp’s long fibers could make paper more recyclable. Since virgin pulp is required for added strength in the recycling of paper, hemp pulp would allow for at least twice as many cycles as wood pulp. However, various analyses have concluded that the use of hemp for conventional paper pulp is not profitable (Fertig 1996).
What is cannabis?Cannabis is a drug that comes from Indian hemp plants such as Cannabis sativa and Cannabis indica. The main active chemical in cannabis is THC (delta-9 tetrahydrocannabinol).Cannabis is a depressant drug. Depressant drugs do not necessarily make you feel depressed. Rather, they slow down the activity of the central nervous system and the messages going between the brain and the body. When large doses of cannabis are taken it may also produce hallucinogenic effects.For information on synthetic cannabinoids, see our "Legal high" facts page.Other namesCannabis is also known as grass, pot, hash, weed, reefer, dope, herb, mull, buddha, ganja, joint, stick, buckets, cones, skunk, hydro, yarndi, smoke and hooch.What does cannabis look like?Leaves from the cannabis plant are bright green and have a distinctive shape with five or seven leaflets. The flowering tops and upper leaves are covered in a sticky resin.Cannabis is used for the psychoactive (mind and mood-altering) effects of THC and other active ingredients. THC is the chemical in cannabis that makes you feel “high”.There are three main forms of psychoactive cannabis: marijuana, hashish and hash oil.Marijuana is the most common and least potent form of cannabis. Marijuana is the dried leaves and flowers of the plant.Hashish (“hash”) is dried cannabis resin, usually in the form of a small block. The concentration of THC in hashish is higher than in marijuana, producing stronger effects.Hash oil is a thick, oily liquid, golden brown to black in colour, which is extracted from cannabis. Hash oil is the strongest form of cannabis.How and why is it used?The different forms of cannabis are used in different ways:Marijuana is smoked in hand-rolled cigarettes (joints), or in a pipe (a bong).Hashish is usually added to tobacco and smoked, or baked and eaten in foods such as hash cookies.Hash oil is usually spread on the tip or paper of a cigarette and then smoked.Cannabis and hash can also be smoked in a vaporiser. Vaporisers heat cannabis to temperatures that release its active ingredients while minimising the toxins associated with burning.The THC in cannabis is absorbed into the bloodstream through the walls of the lungs (if smoked), or through the walls of the stomach and intestines (if eaten). The bloodstream carries the THC to the brain, producing the “high” effects. Drugs inhaled get into the bloodstream quicker than those eaten. This means that the effects of cannabis when smoked occur more rapidly than when eaten.Paper and textilesSome species of cannabis have few psychoactive effects. These plants are used to produce hemp fibre for use in paper, textiles and clothing.Medical usesCannabis has been used for medical purposes for many centuries. It has been reported that cannabis may be useful to help conditions such as:nausea and vomiting, particularly when associated with chemotherapywasting and severe weight loss, in people with HIV/AIDS, cancer, or anorexia nervosa, as it may be used as an appetite stimulantpain relief, for example in people with cancer and arthritisrelief from symptoms of some neurological disorders that involve muscle spasms, including multiple sclerosis and spinal cord injuryglaucomaepilepsyasthma.For more information, please click on the Australian Drug Foundation's DrugInfo Clearinghouse web site link below.
Karl W. Hillig, a graduate student in the laboratory of long-time Cannabis researcher Paul G. Mahlberg at Indiana University, conducted a systematic investigation of genetic, morphological, and chemotaxonomic variation among 157 Cannabis accessions of known geographic origin, including fiber, drug, and feral populations. In 2004, Hillig and Mahlberg published a chemotaxonomic analysis of cannabinoid variation in their Cannabis germplasm collection. They used gas chromatography to determine cannabinoid content and to infer allele frequencies of the gene that controls CBD and THC production within the studied populations, and concluded that the patterns of cannabinoid variation support recognition of C. sativa and C. indica as separate species, but not C. ruderalis. The authors assigned fiber/seed landraces and feral populations from Europe, Central Asia, and Turkey to C. sativa. Narrow-leaflet and wide-leaflet drug accessions, southern and eastern Asian hemp accessions, and feral Himalayan populations were assigned to C. indica. In 2005, Hillig published a genetic analysis of the same set of accessions (this paper was the first in the series, but was delayed in publication), and proposed a three-species classification, recognizing C. sativa, C. indica, and (tentatively) C. ruderalis. In his doctoral dissertation published the same year, Hillig stated that principal components analysis of phenotypic (morphological) traits failed to differentiate the putative species, but that canonical variates analysis resulted in a high degree of discrimination of the putative species and infraspecific taxa. Another paper in the series on chemotaxonomic variation in the terpenoid content of the essential oil of Cannabis revealed that several wide-leaflet drug strains in the collection had relatively high levels of certain sesquiterpene alcohols, including guaiol and isomers of eudesmol, that set them apart from the other putative taxa. Hillig concluded that the patterns of genetic, morphological, and chemotaxonomic variation support recognition of C. sativa and C. indica as separate species. He also concluded there is little support to treat C. ruderalis as a separate species from C. sativa at this time, but more research on wild and weedy populations is needed because they were underrepresented in their collection.
Our Full Spectrum Hemp Extract has endless possibilities as an add in, like in this berry smoothie 😍✨ Link in bio to purchase! . #fullspectrum #hempextract #cbd #cbdsmoothie #smoothies #berrysmoothie #lucefarm #cleaneating #healthydiet #healthandwellness #healthinspo #eatingwell #realsimple #morningmotivation #fruitforbreakfast #organic #organicfarmers #vermontgrown #cafes #coffeeshops #barista #healthyliving #mctoil #mct #coconutoilbenefits #fitness #plantmedicine #sustainableliving #refusethestraw #noplasticstraws
^ Hayakawa K, Mishima K, Hazekawa M, Sano K, Irie K, Orito K, Egawa T, Kitamura Y, Uchida N, Nishimura R, Egashira N, Iwasaki K, Fujiwara M (January 2008). "Cannabidiol potentiates pharmacological effects of Delta(9)-tetrahydrocannabinol via CB(1) receptor-dependent mechanism". Brain Research. 1188: 157–64. doi:10.1016/j.brainres.2007.09.090. PMID 18021759.
CBD and dogs go together well, according to a lot of studies and veterinarians. CBD can be given to dogs in the form of CBD pill, liquid CBD oil for dogs, or CBD dog treats. There is no difference between these three and it mostly depends on convenience and your dog's preference; however, it's possible that CBD oil for dogs may have better absorption rates.
I’ve been hoarding Girl Scouts Thin Mints lately (they’re especially good if you freeze them)—the chocolate is fine, but the peppermint oil is what makes them addicting enough to go through a whole sleeve without getting sick of them. I’m also trying to cut down on sugar, though, and while it would be a huge stretch to say that this peppermint oil-infused clear lip balm is a direct replacement for Girl Scout cookies, it really does have a very satisfying full-mouth taste of peppermint. The CBD oil, which soothes and facilitates healing at the same time, makes this formula an ideal balm for outdoor enthusiasts and or just those who are prone to painfully chapped lips. For those of us with long-hair-don’t-care, it’s not sticky—as a matter of fact, the formula is on the stiff side and won’t cause your hair to stick to your face, a welcome departure from many balms.
The exploding recreational market for marijuana has rapidly popularized many methods of consuming cannabis that was decidedly part of the fringe just a few short years ago. Smoking marijuana remains the most widely embraced method, due to the greater accessibility of marijuana flower. But legal recreational cannabis is introducing many marijuana users to new forms of the drug, especially concentrates and edibles. Here’s a brief overview of the major methods for consuming marijuana.
Millennia of selective breeding have resulted in varieties that display a wide range of traits; e.g. suited for a particular environments/latitudes, producing different ratios and compositions of terpenoids and cannabinoids (CBD, THC, CBG, CBC, CBN...etc.), fibre quality, oil/seed yield, etc. Hemp grown for fiber is planted closely, resulting in tall, slender plants with long fibers.
Topicals represent a newer emerging market in medical marijuana products geared toward health and beauty. Cannabinoids can be absorbed through the skin for certain therapeutic benefits without any psychoactivity. Additionally, the essential oils in hemp and cannabis provide many benefits for skin health. From moisturizers to shampoos and deodorants, medical cannabis products continue to diversify.
Because of its cloudy classification and constantly-shifting political winds, CBD creates a legal quagmire for anybody who wants to study or recommend its effectiveness as a medicine for animals. To date, there have been no rigorous scientific studies published on marijuana, or even the non-psychoactive CBD, as a treatment for pets with arthritis, seizures, anxiety, or any other medical conditions. But that may soon (hopefully) be changing, as a few studies are either in the planning stages or underway.
Recent European Commission proposals to change its subsidy regime for hemp contained the following negative evaluation of hemp seed: “The use of hemp seed ... would, however, even in the absence of THC, contribute towards making the narcotic use of cannabis acceptable... In this light, subsidy will be denied producers who are growing grain for use in human nutrition and cosmetics.”
In support of the previous study by Power et al. (in press), a second study by Giordano, Ohlsoon, Sundquist, Sundquist, and Kendler (2015) found that the relationship between cannabis use or abuse and schizophrenia may not be as strong as believed. The authors found that as the degree of shared genetic and environmental factors increased (beginning with first cousins to full siblings), the relationship between schizophrenia and cannabis abuse decreased, although it remained significant even in full sibling pairs.
Hemp is considered by a 1998 study in Environmental Economics to be environmentally friendly due to a decrease of land use and other environmental impacts, indicating a possible decrease of ecological footprint in a US context compared to typical benchmarks. A 2010 study, however, that compared the production of paper specifically from hemp and eucalyptus concluded that "industrial hemp presents higher environmental impacts than eucalyptus paper"; however, the article also highlights that "there is scope for improving industrial hemp paper production". Hemp is also claimed to require few pesticides and no herbicides, and it has been called a carbon negative raw material. Results indicate that high yield of hemp may require high total nutrient levels (field plus fertilizer nutrients) similar to a high yielding wheat crop.
CONDITIONS OF USE AND IMPORTANT INFORMATION: This information is meant to supplement, not replace advice from your doctor or healthcare provider and is not meant to cover all possible uses, precautions, interactions or adverse effects. This information may not fit your specific health circumstances. Never delay or disregard seeking professional medical advice from your doctor or other qualified health care provider because of something you have read on WebMD. You should always speak with your doctor or health care professional before you start, stop, or change any prescribed part of your health care plan or treatment and to determine what course of therapy is right for you.
Because CBD oil products are mostly unregulated, there’s no guarantee that any given product contains a safe or effective level of CBD. In fact, a study published in the Journal of the American Medical Association in 2017 found that nearly 70 percent of all CBD products sold online are incorrectly labeled, and could cause serious harm to consumers. Some CBD oils may also contain incorrectly labeled amounts of THC and other compounds.
Our CBD Oil for sale consist of 0.3% THC or less which is the legal limit for this product. CBD Products are not psychotropic and do not cause any effects in the user at all, as it comes with many benefits to relieve any anxiety, pain, medical treatments and more. Hemp is now becoming more popular as it contains high quantities of CBD, fatty acids and low volumes of THC which have been known to be great for the body. Due to this more states are now legalizing the uses of hemp oil, unlike its marijuana counterpart which is illegal to consume in many states.
What exactly is cannabidiol (CBD) and more importantly, what does it do? Those questions and more are at the heart of this comprehensive guide to one of the most fascinating and important compounds of the cannabis plant. Cannabis plants are chemical powerhouses that produce more than 400 different compounds. Not all of those compounds are unique to marijuana, of course, and appear in many other species of plants. That’s why marijuana can smell like pine trees or taste like fresh lemons. But of those 400 compounds, more than 60 of them are totally specific to the plant genus Cannabis. Scientists call these special compounds “cannabinoids.” However, not all cannabinoids are created equal. One of them, cannabidiol, or CBD, holds the key to the wide variety of medicinal and therapeutic effects marijuana offers.
The basic commercial options for growing hemp in North America is as a fiber plant, an oilseed crop, or for dual harvest for both seeds and fiber. Judged on experience in Canada to date, the industry is inclined to specialize on either fiber or grain, but not both. Hemp in our opinion is particularly suited to be developed as an oilseed crop in North America. The first and foremost breeding goal is to decrease the price of hempseed by creating more productive cultivars. While the breeding of hemp fiber cultivars has proceeded to the point that only slight improvements can be expected in productivity in the future, the genetic potential of hemp as an oilseed has scarcely been addressed. From the point of view of world markets, concentrating on oilseed hemp makes sense, because Europe has shown only limited interest to date in developing oilseed hemp, whereas a tradition of concentrating on profitable oilseed products is already well established in the US and Canada. Further, China’s supremacy in the production of high-quality hemp textiles at low prices will be very difficult to match, while domestic production of oilseeds can be carried out using technology that is already available. The present productivity of oilseed hemp—about 1 t/ha under good conditions, and occasional reports of 1.5 to 2 t/ha, is not yet sufficient for the crop to become competitive with North America’s major oilseeds. We suggest that an average productivity of 2 t/ha will be necessary to transform hempseed into a major oilseed, and that this breeding goal is achievable. At present, losses of 30% of the seed yields are not uncommon, so that improvements in harvesting technology should also contribute to higher yields. Hemp food products cannot escape their niche market status until the price of hempseed rivals that of other oilseeds, particularly rapeseed, flax, and sunflower. Most hemp breeding that has been conducted to date has been for fiber characteristics, so that there should be considerable improvement possible. The second breeding goal is for larger seeds, as these are more easily shelled. Third is breeding for specific seed components. Notable are the health-promoting gamma-linolenic acid; improving the amino acid spectrum of the protein; and increasing the antioxidant level, which would not only have health benefits but could increase the shelf life of hemp oil and foods.
Bonn-Miller also explained that it's imperative to exhaust the traditional and established front-line treatments that are available before seeking out these products. "CBD is not really a first-line treatment for anything," he said. "You don’t want situations where somebody says, 'I have cancer I'm going to forgo chemotherapy because I read something about CBD or THC helping with cancer.'" That's not a good idea, Bonn-Miller said. "Not only is the science not there, but you may end up worse off."
Plant, (kingdom Plantae), any multicellular eukaryotic life-form characterized by (1) photosynthetic nutrition (a characteristic possessed by all plants except some parasitic plants and underground orchids), in which chemical energy is produced from water, minerals, and carbon dioxide with the aid of pigments and the radiant energy of the Sun, (2)…
Due to the influence of big pharma,the FDA has refused (until recently) to investigate the benefits of phytocannabinoid oil for humans or pets. We are not allowed to say or imply that phytocannabinoid has any medical benefits, however the 1st Amendment also protects our right to tell you about our experiences with phytocannabinoid helping our own pets, and the fact that there have been more than 1500 clinical studies regarding the effectiveness of phytocannabinoids.The owners and staff of Innovet believe, but cannot legally claim or imply, that countless dogs and cats have used phytocannabinoid oils for many conditions.
From the 1950s to the 1980s, the Soviet Union was the world's largest producer of hemp (3,000 square kilometres (1,200 sq mi) in 1970). The main production areas were in Ukraine, the Kursk and Orel regions of Russia, and near the Polish border. Since its inception in 1931, the Hemp Breeding Department at the Institute of Bast Crops in Hlukhiv (Glukhov), Ukraine, has been one of the world's largest centers for developing new hemp varieties, focusing on improving fiber quality, per-hectare yields, and low THC content.
In the Australian states of Tasmania, Victoria, Queensland, New South Wales, and most recently, South Australia, the state governments have issued licences to grow hemp for industrial use. The first to initiate modern research into the potential of cannabis was the state of Tasmania, which pioneered the licensing of hemp during the early 1990s. The state of Victoria was an early adopter in 1998, and has reissued the regulation in 2008.
Many countries differentiate between marijuana and hemp by the amount of THC produced per weight of a dry plant. In the U.S., industrial hemp is defined as “the plant Cannabis sativa L. and any part of such plant, whether growing or not, with a delta-9 THC concentration of not more than 0.3 percent on a dry weight basis.” The European Union has set the limit at 0.2 percent, while in Great Britain the limit is zero, unless you have a cultivation license to grow industrial hemp with no more than 0.2% THC.
Molecular analytical techniques developed in the late 20th century are being applied to questions of taxonomic classification. This has resulted in many reclassifications based on evolutionary systematics. Several studies of Random Amplified Polymorphic DNA (RAPD) and other types of genetic markers have been conducted on drug and fiber strains of Cannabis, primarily for plant breeding and forensic purposes. Dutch Cannabis researcher E.P.M. de Meijer and coworkers described some of their RAPD studies as showing an "extremely high" degree of genetic polymorphism between and within populations, suggesting a high degree of potential variation for selection, even in heavily selected hemp cultivars. They also commented that these analyses confirm the continuity of the Cannabis gene pool throughout the studied accessions, and provide further confirmation that the genus consists of a single species, although theirs was not a systematic study per se.
Separation of hurd and bast fiber is known as decortication. Traditionally, hemp stalks would be water-retted first before the fibers were beaten off the inner hurd by hand, a process known as scutching. As mechanical technology evolved, separating the fiber from the core was accomplished by crushing rollers and brush rollers, or by hammer-milling, wherein a mechanical hammer mechanism beats the hemp against a screen until hurd, smaller bast fibers, and dust fall through the screen. After the Marijuana Tax Act was implemented in 1938, the technology for separating the fibers from the core remained "frozen in time". Recently, new high-speed kinematic decortication has come about, capable of separating hemp into three streams; bast fiber, hurd, and green microfiber.
Foreign sources, China in particular, can produce hemp seed cheaply, but imported seed must be sterilized, and the delays this usually requires are detrimental. Seed that has been sterilized tends to go rancid quickly, and so it is imperative that fresh seed be available, a great advantage for domestic production. An additional extremely significant advantage that domestic producers have over foreign sources is organic production, which is important for the image desired by the hemp food market. Organic certification is much more reliable in North America than in the foreign countries that offer cheap seeds. Whereas China used to supply most of the hempseed used for food in North America, Canadian-grown seeds have taken over this market.
i had a hip replacement in 17 prior to that it was 2 years of agony. i created my own cbd/thc creame. the thc is an important component for its medical benefits, youll just have to try small samples to see if external applications irritate you, if so go to 150 mg. cbd creme. no thc. Get the hip done, huge improvement in quality of life. Im 62 years old so its been great since the hip.
Now imagine all this possibility actually exists but you can't enjoy any of it because people in power once decided the plant from which it's all derived has a scorned cousin named "marijuana." If you can wrap your mind around this dereliction of logic, only then can you begin to understand the painfully silly policies America's had in place that have kept hemp from coating our farmland with hues of pale yellow and light green.
Smoking marijuana is hands down the most widely used method of consuming cannabis. It’s also the simplest: a rolling paper and some dried marijuana flower are all you need. Other, more technological methods of smoking marijuana may be rising in popularity. But for many people, the social experience of passing weed around with some friends is what cannabis is all about.
Fig. 8. Scanning electron micrographs of the abaxial surface of a perigonal bract (which envelops the fruit). These bracts are the most intoxicating part of the plant, and may contain 20% THC, dry weight. The resin is synthesized both in stalked and sessile glands. Multicellular secretory glands (of phallic appearance), some broken stalks of these (note cellular appearance), and unicellular cystolith hairs (claw-like structures) are pictured. Fig. 9. Some important cannabinoids of cannabis resin. D9-THC (delta-9 tetrahydrocannabinol) is the chief intoxicant chemical and predominates in intoxicant strains, while the isomer D8-THC is usually present in no more than trace amounts. CBD (cannabidiol) is the chief non-intoxicant chemical, and predominates in non-intoxicant strains; it has sedative effects. The non-intoxicant CBN (cannabinol) is a frequent degradation or oxidation product. The non-intoxicant cannabichromene (CBC) is typically found in trace amounts in intoxicant strains. The non-intoxicant cannabigerol (CBG) is considered to be a precursor of the other cannbinoids (see Fig. 10).